Contact Us

Service Phone
0755-25643415/25431458
Fax
0755-25431456
News
Your position:Home > News > Company News > The fundamental difference bet.....

The fundamental difference between the way and the process of paint and painting

  • Author:Yang Chen
  • Release Date:2014-03-28
Paint and painting may be identified from the following aspects:
1, the process:
A, paint: a primer on the base hit three times, four times finish, again per the paint, are sent to clean the barn constant temperature baking.
B, paint: woolen mill on the substrate, and then spray painted under natural dry.
2, the film.
Practice: the four sides touch paint door edges, whether lubrication, certificate; examine edges of color, whether the door color contrast.
Contrast: A, paint: angular creamy color similar. Proof paint flat uniform, the color adopted fullness.
B, paint: angular sector careful, lighter than the door. Confirmed that the film is uneven, the color adopted without hardship:
3 lines.
Practice: cf brilliant shine, watching paint door appearance, whether orange peel scene.
Contrast: A, paint: door contour lubrication, no lines, orange peel.
B, painting: lines outside the door there is not only slippery, orange peel circumstances.
4, appearance.
Practice: touch paint door appearance, could have dust, bubbles.
Contrast: A, paint: Door smooth appearance, creamy.
B, paint: exterior door particulate matter, not creamy, sense of touch are different.
V. wearable.
Practice: hit with a hard object.
Contrast: A, paint: no abnormal condition, the film without defeat Qianan.
B, paint: There are bug, the film is very problematic drop, off white.
Paint room affair authorities and tasks
Paint room structure
Paint the entire room was fabricated structure. Housing body spray using picture-pluggable wall insulation, sealing, insulation properties, rooms equipped with working front door body, to facilitate access to mission personnel; aluminum edging door, where the door is equipped with test window, you can always inspect the room News. Choose low noise high wind turbine to ensure achievement of the completion of the painting; perfectly interchangeable stainless steel heat, heat exchangers comply with high, long-life applications.
Paint room work affair
Paint room as usual with baking spray paint is used, so, paint room should be the most accurate depiction "spray paint room."
When painting, the external atmosphere through the rear end of Britain advanced filter to filter by the fan roof, and then the top of the filter Britain at the end of secondary infection stragglers filtered into the room. The adoption of the whole room atmosphere type drop to 0.2-0.3m / s rate of upward movement of the spray mist particles can not after a pause in the atmosphere, directly through the bottom outlet and an outer housing undermined. As promised endless circulation of conversion, so that when painting the room cleanliness atmosphere more than 98%, and not into the air with the pressure, the car will be formed around a constant airflow to remove excess paint, so the maximum limit to assure the quality of paint.
When paint, paint the throttle raised seat, hot air circulation, baking room temperature to a predetermined elevation deft boring temperature (55 ℃ -60 ℃). After the fan early development of the external fresh air filtration, heat exchange chamber to the top of the paint room and thermal converters happen, and then a second filter contaminated Britain at the end, the end of Britain cycle hot air damper effect, in addition to a large number of fresh sucked into live outside air, the vast part of the hot atmosphere and heating continued use, making the paint room temperature gradually move higher. When the temperature of arrival set temperature incinerator active suspension; configuration when the temperature drops to the temperature, the fan and the burner and a passive seal that paint stick with respect to the room temperature constant. When the paint reaches the end of the set Nianguang Nianguang, paint rooms actively shut down, end paint.